VSD Intern – DAC IP design using Sky130 PDKs – Part 3

The webinar aims to do analog layout design of a 10-bit potentiometric Digital to Analog Converter, from scratch, using Magic and Sky130 PDKs. The target is to layout and generate GDS for 10-bit potentiometric DAC with 3.3v analog voltage, 1.8v digital voltage and 1 off-chip external voltage reference. This is a follow-up webinar of “VSD Intern – DAC IP design using Sky130 PDKs – Part 2” conducted by Harshitha Basavaraju

In real world, most of the data available is in the form of analog in nature. We have two types of converters analog to digital converter and digital to analog converter. These two converting interfaces are essential to obtain the required operations of a processor to manipulate the data of digital electronic equipment and an analog electric equipment. Digital to Analog Converter (DAC) is a device that transforms digital data into an analog signal in order to interact with the real world. The digital signal is represented with a binary code, which is a combination of bits 0’s and 1’s. The digital data can be produced from a microprocessor, Field Programmable Gate Array (FPGA), or Application Specified Integrated Circuit (ASIC). There are two commonly used DAC conversions – Weighed resistors method and R-2R ladder network method. Applications of a DAC: audio amplifier, video encoder, display electronics, data acquisition systems, calibration, Digital potentiometer.

This webinar will cover:

Introduction

• Introduction to DAC fundamentals

• Introduction to DAC IP Specifications

DAC IP design basics and tool installation

• Tool Installations

• DAC Circuit Topology

Basics of DAC IP Layout

• CMOS Cross Sectional View

• Metal Layers

• Resistor and Capacitor Layout Theory

• Magic tool Basics

• Resistor Layout demo

• Capacitor Layout

Inverter and switch layout LIVE Labs

• Inverter layout starting

• Inverter Layout Continued

• Inverter Layout Complete

• Switch Layout starting

• Switch Layout Complete

10-bit DAC layout design and post-layout analysis

• 2Bit DAC to 10Bit DAC starting

• 2Bit DAC to 10Bit DAC Complete

• Output Response Evaluation

• DNL and INL theory

• DNL and INL Calculations

Who this course is for:

• Beginner or fresher looking to start career in analog VLSI design
• Professional Physical Design engineers looking to know more about IP design or IP blocks which they use as black box